For more information, please refer to the original post about this cosplay.
FINISHED!
Construction
- Random Goodwill purse that will become the left pouch
- Disassmbling to reveal some weird stuff inside
- A strip of old glue
- Unused extra parts that weren’t simply trashed
- A useful part, trimmed into shape
- These pieces will become the pouch
- These pieces will become the pouch (tops)
- Breaking out the wing dividers
- Breaking out the wing dividers
- Use the wing dividers to score a line a fixed distance from the edge
- The scored line
- A nifty four hole punch makes even stitching a breeze
- Laid out on my tooling surface
- A gentle beating with a rubber mallet
- It’s important to line up the last hole with the first tooth to keep the spacing consistent
- Continuing on
- Derp
- Derp
- (mostly) even holes all around for the decorative stitching
- It doesn’t always go all the way through…
- So should I use this dremel tip to fix that?
- Or this one one?
- Or this one one?
- An initial running stitch in black for structural integrity
- An initial running stitch in black for structural integrity
- A weird fabric layer leftover from the purse for illusory thickness
- First bits attached
- The bottom of the bag will fold here
- Making a crease with the lighter
- BARGE LEATHER CEMENT HOW I LOVE THEE
- Glue one side…
- …and then the other.
- Wait ten minutes and put ‘em together.
- Put a weight on it then wait on it.
- Tightly glued so it’s easier to stitch
- A simple running stitch in black thread on the back
- The stitch on the inside
- The side pieces, already tooled
- A different look at the side pieces
- I just happen to have a whole bag of random leather strips
- I chose this strip
- I have no idea why this image is out of order
- I cut the strip in half
- It wasn’t exactly even…
- So I sliced it.
- Again with the wing dividers
- Again with the wing dividers
- I adore evenness…
- Adding the holes along the lines
- My roommate was asleep so I wasn’t able to hammer very hard
- However the dremel is fairly quite and finishes the job nicely
- DREMEL
- Holy strips of leather Batman
- Holy strips of leather Batman
- Add some sinew
- Tie it off
- Light it!
- Watch it burn
- Ewww
- One half finished belt loop
- One finished belt loop
- 1.5 finished belt loops
- Two finished belt loops
- Stitching the first belt loop to the back of the pouch
- Stitching the first belt loop to the back of the pouch
- Stitching the first belt loop to the back of the pouch
- It’s not exactly elegant, but it works
- The belt loop stitches on the inside
- Two loops!
- Stitching on a side
- Stitching on a side
- Stitching on a side
- A finished side
- The top flap wasn’t wanting to lay over nicely so I clamped it down
- The leather pieces keep the channel locks from putting marks in the pouch
- Both sides on
- Added the stitching to the top flap
- Almost done!
- This was originally on the purse and would do nicely except…
- Obviously Anders didn’t wear Liz Claiborne
- So let’s dremel!
- The “Claiborne” is gone…
- There we go…
- Touch up with the metal brush
- Poke it through the flap
- And bend it down
- Stitching up the bottom on the front
- And it’s ready! Except…
- I had this extra magnet laying around…
- So a little glue…
- …and some on the pouch….
- And now it’ll stay closed!
- All done! A purse into a bag. DARK METAMORPHOSIS!
- Using some cardboard to add some reinforcement
- Snippy snippy
- Reinforcements!
- They go in here…
- BARGE
- Certified for Windows Vista
- I have no idea what this piece is for…
- Left side support
- Drying
- Bigger reinforcement piece
- Drying more
- All done, even though this doesn’t look like a nice finished shot. Derp.












































































































Leave Your Mark